Double Glazed Window Repair

Double glazing is a fantastic investment in energy efficiency. It helps prevent heat loss during the winter months and helps to keep your home cool in summer. Having your double glazed windows repaired when needed is a great way to ensure that they function correctly.

Over time, your double glazed windows may experience issues such as condensation and misting. Double glazed windows can become difficult to open and close.

Broken Panes

A unruly ball or a flying stone from your lawnmower or even an intense storm could shatter your double-pane windows and leave your home vulnerable to the elements. Although a cracked glass window is difficult to repair however, it does not need to be replaced. In fact, the insulated glass between the two panes is in good condition, and you can fix your double-pane window with some DIY effort.

To start, you'll need to take the broken glass out of the frame. You'll need to be careful to prevent glass shards from falling to the floor or falling off the frame. Use work gloves to protect your hands and use a rag around the broken glass to avoid further cuts or damage. After removing the broken glass and cleaning the entire frame of the window to remove any remaining sealant and debris. It is important to smooth rough areas of the frame to create an even surface for your new glass.

Once the frame is cleaned then you can apply a fresh layer of glass to the area where the damaged pane was removed. This is the most effective way to ensure that your window is sealed and protected and will help you save energy costs by keeping water and drafts from entering the house. The next step is to select the material for your glazing. There are several options available, including clear tape that is more robust than regular tape and can keep your window secure from further cracking, as well as glazing film that is similar to clear plastic wrap. This choice has the benefit that it can be painted to match the frame of your window and will also block out the elements like ice and rain.

Whatever the material you choose, it is important to press the glazier's points into the seam where the putty meets the frame. These will hold the glass in place, and help it adhere to the frame. Glazier's points can be found in hardware stores, and they come in pre-made ropes that you simply roll out onto the frame rabbets.

Condensation

Double glazing can be prone to condensation issues and if you encounter this issue, it is best to call the company that supplied the window. A lot of windows come with warranties and guarantees that cover these problems. Condensation or fogging between the windows' panes is a sign that the seals are damaged. Only a professional can resolve this problem by replacing both panes.

The process is tricky and requires special tools to take off the old pane and then install the new one, but it can be done by a professional who will provide the necessary equipment. Utilizing these tools could be risky it is recommended to leave this kind of job to an expert.

If you decide to undertake this yourself, be sure to wear safety glasses and gloves to protect yourself from any broken glass pieces that could fly off during the process. It is crucial to remove all metal or putty points from the grooves that will hold the new window. It is also recommended to wire-brush the frame and vacuum or wipe with a damp cloth. After the frame has dried it is time to order an additional piece of glass that's 1/8" shorter in both directions than the existing window. Test-fit the glass into the grooves.

Based on the frames you have depending on your frames, you'll need to apply a thin layer of silicone caulk on the grooves to ensure that your new pane is securely in position. After the caulk dries it is time to smooth it out and make any necessary adjustments. The wood molding can then be reinstalled.

If the weather abruptly changes, double-glazed windows could become difficult to open or close. Extreme temperatures can cause the frames to expand or shrink and this can make them slide or become stuck. You can try wiping down the frames with water and then lubricating them when this happens however, it's better to seek advice from the company who installed your windows.

Misunderstood

Misted Double Glazing is a window problem that occurs when moisture gets trapped between the glass panes of your double-glazed windows. Double glazing consists of two panes of glass which are separated by an insulating space typically filled with argon gas to provide increased thermal efficiency. This creates a airtight seal that keeps warm indoor air in, and cold outside air out.

As time passes, the seal will begin to break down and moisture will start to build up between the windows, causing them to become misty. This occurs because the sun's rays heat the gap between the panes of windows, causing the water to evaporate.

This is a normal thing to happen but if it happens between the window panes, it can be a problem since it will no longer be able to control the temperature in the room and allow the outside temperature to influence the indoor temperature. If you notice your double-glazed windows are turning misty, call in the experts at Northfield Glass to investigate.

We can replace a single blow sealed unit, without having to replace the entire window. This is far more streamlined than a total replacement. click here Our misty window repair involves removing the glass unit, cleaning it, and replacing it with a fresh one to make an airtight seal.

There are companies in the industry that claim to drill holes into your existing misted windows and inject chemicals into them which claim to eliminate condensation and fog however, we do not recommend this method. This method isn't just unattractive, but could also damage the toughened glass leaving you with a window which does not function properly.

It is crucial to resolve the issue as soon as you can, because if left untreated it can cause mould growth that not only damages the window but can also pose health risks to your family. Moisture can cause other issues within your home, such as dampness or rot. In some cases it might be necessary to replace the entire window.

Blown or failed

Double-glazed windows consist of two glass panes with an air or inert between them. This helps to improve their thermal efficiency, keeping the cold out and heat in. Over time, this gas can become depressurised, leading to a number of problems.

Condensation between the panes is among the most common. While it is a natural event, it doesn't necessarily mean that your window is failing however it could be an indication that you have to seal your windows. Condensation can be a sign your double glazing has broken in which case it will need to be replaced completely.

Double-glazed windows may also cause drafts. It could be due to the seal being damaged or handle that is broken, or a broken lock. A draught can be noticeable and will lead to more expensive heating bills, so it is important to get it fixed sooner rather than later. Test the seals around the window frame by smelling cold air.

You may also see water beads on the interior of windows when your window seals aren't performing as they should. This is a clear indication that you need to re-seal your double glazed windows.

The frames of your windows are designed to move a bit in order to do to keep the glass sheets in the right place. Over time, this special packaging material could become compressed. This will cause the seal to become broken. This allows air to circulate between the panes and reduce the efficiency of your window.

A blown seal is a clear sign that your double glazing has failed and should be repaired immediately. A blown seal will stop your double glazing from performing its primary function, which is to keep cold air out and warm air in. Furthermore, a blow-off seal will let your home's moisture in, which could result in mold and other unpleasant conditions. Call a double glazing specialist immediately you spot a damaged window seal. They can fix the entire unit.